WIRELESS MICROPHONE
SPECIFICATION TRANSMITTER;
> Frequency: UHF 640~690MHZ
> Frequency stability: 10ppm
> Transmitting power: 10mV
> Transmission distance: 100M
> Harmonic suppression: 65db or more
> Modulation method: FM
> Maximum modulation degree: 75K
> Working voltage: 3V
> Working current: 120mA
> Function display mode: LCD
> Frequency: UHF 640~690MHZ
> Frequency stability: 10ppm
> Transmitting power: 10mV
> Transmission distance: 100M
> Harmonic suppression: 65db or more
> Modulation method: FM
> Maximum modulation degree: 75K
> Working voltage: 3V
> Working current: 120mA
> Function display mode: LCD
SPECIFICATION RECEIVER;
> Frequency: 640~690MHZ
> Sensitivity: 13dbuv
> Leading inhibition: 65db
> Audio output: 200mV
> Signal to noise ratio: 100dB
> Distortion: <0.1%
> Frequency response: 50Hz-15KHz
> Function display mode: LCD
> Power supply: DC-12V
> Frequency: 640~690MHZ
> Sensitivity: 13dbuv
> Leading inhibition: 65db
> Audio output: 200mV
> Signal to noise ratio: 100dB
> Distortion: <0.1%
> Frequency response: 50Hz-15KHz
> Function display mode: LCD
> Power supply: DC-12V
SPECIFICATION TRANSMITTER;
> Frequency range: UHF 640-690MHz
> Adjustable range: 50MHz
> Number of channels: 2x100
> Channel interval: 250KHz
> Transmission distance: 100 (m)
> Frequency stability: within ±0.005%
> Dynamic range: 100dB
> Maximum frequency deviation: ±45KHz
> Audio response: 80Hz-18KHz(±3dB)
> Comprehensive signal-to-noise ratio: more than 105dB
> Comprehensive distortion: ≤0.5%
> Working temperature: -10℃ ~ 40℃
> Frequency range: UHF 640-690MHz
> Adjustable range: 50MHz
> Number of channels: 2x100
> Channel interval: 250KHz
> Transmission distance: 100 (m)
> Frequency stability: within ±0.005%
> Dynamic range: 100dB
> Maximum frequency deviation: ±45KHz
> Audio response: 80Hz-18KHz(±3dB)
> Comprehensive signal-to-noise ratio: more than 105dB
> Comprehensive distortion: ≤0.5%
> Working temperature: -10℃ ~ 40℃
SPECIFICATION RECEIVER;
> Frequency: 640~690MHZ
> Sensitivity: 13dbuv
> Leading inhibition: 65db
> Audio output: 200mV
> Signal to noise ratio: 100dB
> Distortion: <0.1%
> Frequency response: 50Hz-15KHz
> Function display mode: LCD
> Power supply: DC-12V
> Frequency: 640~690MHZ
> Sensitivity: 13dbuv
> Leading inhibition: 65db
> Audio output: 200mV
> Signal to noise ratio: 100dB
> Distortion: <0.1%
> Frequency response: 50Hz-15KHz
> Function display mode: LCD
> Power supply: DC-12V
SPECIFICATION TRANSMITTER;
> Frequency range: UHF 640-690MHz
> Adjustable range: 50MHz
> Number of channels: 2x100
> Channel interval: 250KHz
> Transmission distance: 150 (m)
> Frequency stability: within ±0.005%
> Dynamic range: 100dB
> Maximum frequency deviation: ±45KHz
> Audio response: 80Hz-18KHz(±3dB)
> Comprehensive signal-to-noise ratio: more than 105dB
> Comprehensive distortion: ≤0.5%
> Working temperature: -10℃ ~ 40℃
> Frequency range: UHF 640-690MHz
> Adjustable range: 50MHz
> Number of channels: 2x100
> Channel interval: 250KHz
> Transmission distance: 150 (m)
> Frequency stability: within ±0.005%
> Dynamic range: 100dB
> Maximum frequency deviation: ±45KHz
> Audio response: 80Hz-18KHz(±3dB)
> Comprehensive signal-to-noise ratio: more than 105dB
> Comprehensive distortion: ≤0.5%
> Working temperature: -10℃ ~ 40℃
SPECIFICATION RECEIVER;
> Frequency: 640~690MHZ
> Sensitivity: 13dbuv
> Leading inhibition: 65db
> Audio output: 200mV
> Signal to noise ratio: 100dB
> Distortion: <0.1%
> Frequency response: 50Hz-15KHz
> Function display mode: LCD
> Power supply: DC-12V
> Frequency: 640~690MHZ
> Sensitivity: 13dbuv
> Leading inhibition: 65db
> Audio output: 200mV
> Signal to noise ratio: 100dB
> Distortion: <0.1%
> Frequency response: 50Hz-15KHz
> Function display mode: LCD
> Power supply: DC-12V
SPECIFICATION TRANSMITTER;
> Frequency range: UHF 640~690MHz
> Frequency stability: 10ppm
> Transmitting power: 10mV
> Transmission distance: 100 (m)
> Harmonic suppression: 65db or more
> Maximum modulation degree: 75K
> Working voltage: 3V
> Working current: 120mA
> Function display mode: LCD
> Frequency range: UHF 640~690MHz
> Frequency stability: 10ppm
> Transmitting power: 10mV
> Transmission distance: 100 (m)
> Harmonic suppression: 65db or more
> Maximum modulation degree: 75K
> Working voltage: 3V
> Working current: 120mA
> Function display mode: LCD
SPECIFICATION RECEIVER;
> Frequency: 640~690MHZ
> Sensitivity: 13dbuv
> Leading inhibition: 65db
> Audio output: 200mV
> Signal to noise ratio: 100dB
> Distortion: <0.1%
> Frequency response: 50Hz-15KHz
> Function display mode: LCD
> Power supply: DC-12V
> Frequency: 640~690MHZ
> Sensitivity: 13dbuv
> Leading inhibition: 65db
> Audio output: 200mV
> Signal to noise ratio: 100dB
> Distortion: <0.1%
> Frequency response: 50Hz-15KHz
> Function display mode: LCD
> Power supply: DC-12V
ANTENNA SIGNAL BOOSTER AMPLIFIER
> Broadband: U-segmen LPDA Antenna
> Frequency: U-sec. 470MHz~970MHz
> In/Out Impedance: 50 Ohms
> Gain Module: -24~12dB
> Gain Antenna: -6~12dB
> Cascade: Up to 32 Sets of Wireless
> Antenna A: 5Ch
> Antenna B: 5Ch
> Broadband: U-segmen LPDA Antenna
> Frequency: U-sec. 470MHz~970MHz
> In/Out Impedance: 50 Ohms
> Gain Module: -24~12dB
> Gain Antenna: -6~12dB
> Cascade: Up to 32 Sets of Wireless
> Antenna A: 5Ch
> Antenna B: 5Ch
> Broadband: U-segmen LPDA Antenna
> Frequency: U-sec. 470MHz~970MHz
> In/Out Impedance: 50 Ohms
> Gain Module: -24~12dB
> Gain Antenna: -6~12dB
> Cascade: Up to 56 Sets of Wireless
> Antenna A: 8Ch
> Antenna B: 8Ch
SPECIFICATION;
> Broadband: U-segmen LPDA Antenna
> Frequency: U-sec. 470MHz~970MHz
> In/Out Impedance: 50 Ohms
> Gain Module: -24~12dB
> Gain Antenna: -6~12dB
> Cascade: Up to 32 Sets of Wireless
> Antenna A: 5Ch
> Antenna B: 5Ch
SPECIFICATION;
> Broadband: U-segmen LPDA Antenna
> Frequency: U-sec. 470MHz~970MHz
> In/Out Impedance: 50 Ohms
> Gain Module: -24~12dB
> Gain Antenna: -6~12dB
> Cascade: Up to 32 Sets of Wireless
> Antenna A: 5Ch
> Antenna B: 5Ch
SPECIFICATION;
> Broadband: U-segmen LPDA Antenna
> Frequency: U-sec. 470MHz~970MHz
> In/Out Impedance: 50 Ohms
> Gain Module: -24~12dB
> Gain Antenna: -6~12dB
> Cascade: Up to 56 Sets of Wireless
> Antenna A: 8Ch
> Antenna B: 8Ch
DRUM
> 5 piece DTX Drum set including 2 Cymbals & Hi-Hat.
> 3-Zone TCS Textured Cellular Silicone Snare Drum Pad
> TCS Textured Cellular Silicone Tom Pads
> Choke-able Two 3-Zone Cymbal Pads.
> Real Hi-Hat stand with moving Hi-Hat pad
> 1,396 Voices, 64 note polyphony
> 100 MB Wave-ROM, 64 MB Flash-ROM.
> USB to DEVICE to import additional sound samples.
> USB to HOST to play and control VST instruments
> 12 Trigger Inputs, Aux In
> 5 Piece Drum Set including 2 Cymbals & Hi-Hat .
> Snare: 1 pc
> Tom: 2 pcs
> Floor Tom: 1 pc
> Kick/Bass: 1 pc.
> Cymbal: 4 pcs
> Crash Cymbal: ZULDJIAN
> Ride Cymbal: ZULDJIAN
> Hi-Hat Cymbal: ZULDJIAN
SPECIFICATION;
> 5 piece DTX Drum set including 2 Cymbals & Hi-Hat.
> 3-Zone TCS Textured Cellular Silicone Snare Drum Pad
> TCS Textured Cellular Silicone Tom Pads
> Choke-able Two 3-Zone Cymbal Pads.
> Real Hi-Hat stand with moving Hi-Hat pad
> 1,396 Voices, 64 note polyphony
> 100 MB Wave-ROM, 64 MB Flash-ROM.
> USB to DEVICE to import additional sound samples.
> USB to HOST to play and control VST instruments
> 12 Trigger Inputs, Aux In
SPECIFICATION;
> 5 Piece Drum Set including 2 Cymbals & Hi-Hat .
> Snare: 1 pc
> Tom: 2 pcs
> Floor Tom: 1 pc
> Kick/Bass: 1 pc.
> Cymbal: 4 pcs
> Crash Cymbal: ZULDJIAN
> Ride Cymbal: ZULDJIAN
> Hi-Hat Cymbal: ZULDJIAN
GUITAR, BASS & KEYBOARD AMPLIFIER
> Historic "JC Clean" tone & signature
> Powerful 120W stereo amp with two 12" "silver cone" speakers
> Two input channels (Normal & Effect), each with three-band EQ and bright on/off
> Built-in vibrato, distortion and authentic spring reverb.
> Stereo effects loop for connecting external effect.
> Type: Tube
> Number of Channels: 2
> Total Power: 100W
> Preamp Tubes: 3 x ECC83/12AX7
> Power Tubes: 4 x 5881
> Reverb: Yes
> EQ: 3-band EQ, Presence
> Inputs: 1 x 1/4"
> Outputs: 2 x 1/4" (speaker out), 2 x 1/4" (direct, compensated)
> Effects Loop: Yes
> Configuration:4 x 12"
> Speakers: Celestion G12T-75
> Power Handling:300W
> Impedance:16 ohms/4 ohms (Mono), 8 ohms (Stereo)
> Mono/Stereo:Mono, Stereo
> Type: Tube
> Number of Channels: 2
> Total Power: 100W
> Preamp Tubes: 3 x ECC83/12AX7
> Power Tubes: 4 x 5881
> Reverb: Yes
> EQ: 3-band EQ, Presence
> Inputs: 1 x 1/4"
> Outputs: 2 x 1/4" (speaker out), 2 x 1/4" (direct, compensated)
> Effects Loop: Yes
> Configuration: 4 x 12"
> Speakers: Celestion G12 Vintage
> Power Handling:300W
> Impedance:16 ohms/4 ohms (Mono), 8 ohms (Stereo)
Mono/Stereo:Mono, Stereo
> 480W to woofer 50W to horn
> Electronic crossover for seamless 2-way sound 4 bass-specific bands of active EQ
> 5/4 string voicing filters
> Ultra low-noise input section more than 90dB S/N 10dB pad
> Output Section: Boost Woofer Level with Crossover Switch
> Direct Out: XLR
> Pre/Post Switch
> Configuration: 4 x 10″
> Speaker: cast-frame neodymium woofers deliver tight, extended lows
> Power Handling: 800W
> Impedance: 8 Ohm System may be run bi-amped or full-range
> 180 Watt 15" speaker and Piezo tweeter
> Output selection and Shape switch for tonal effect adjustment.
> 1/4" phone output and 3 Band Equalizer
> Stereo Link In/Out
> Rugged design, strong carpet-wrapped body, edge protector and metal grille.
SPEC. ROLAND JC120;
> Historic "JC Clean" tone & signature
> Powerful 120W stereo amp with two 12" "silver cone" speakers
> Two input channels (Normal & Effect), each with three-band EQ and bright on/off
> Built-in vibrato, distortion and authentic spring reverb.
> Stereo effects loop for connecting external effect.
SPECIFICATION HEAD;
> Type: Tube
> Number of Channels: 2
> Total Power: 100W
> Preamp Tubes: 3 x ECC83/12AX7
> Power Tubes: 4 x 5881
> Reverb: Yes
> EQ: 3-band EQ, Presence
> Inputs: 1 x 1/4"
> Outputs: 2 x 1/4" (speaker out), 2 x 1/4" (direct, compensated)
> Effects Loop: Yes
SPECIFICATION CAB;
> Configuration:4 x 12"
> Speakers: Celestion G12T-75
> Power Handling:300W
> Impedance:16 ohms/4 ohms (Mono), 8 ohms (Stereo)
> Mono/Stereo:Mono, Stereo
SPECIFICATION HEAD;
> Type: Tube
> Number of Channels: 2
> Total Power: 100W
> Preamp Tubes: 3 x ECC83/12AX7
> Power Tubes: 4 x 5881
> Reverb: Yes
> EQ: 3-band EQ, Presence
> Inputs: 1 x 1/4"
> Outputs: 2 x 1/4" (speaker out), 2 x 1/4" (direct, compensated)
> Effects Loop: Yes
SPECIFICATION CAB;
> Configuration: 4 x 12"
> Speakers: Celestion G12 Vintage
> Power Handling:300W
> Impedance:16 ohms/4 ohms (Mono), 8 ohms (Stereo)
Mono/Stereo:Mono, Stereo
SPECIFICATION HEAD;
> 480W to woofer 50W to horn
> Electronic crossover for seamless 2-way sound 4 bass-specific bands of active EQ
> 5/4 string voicing filters
> Ultra low-noise input section more than 90dB S/N 10dB pad
> Output Section: Boost Woofer Level with Crossover Switch
> Direct Out: XLR
> Pre/Post Switch
SPECIFICATION CAB;
> Configuration: 4 x 10″
> Speaker: cast-frame neodymium woofers deliver tight, extended lows
> Power Handling: 800W
> Impedance: 8 Ohm System may be run bi-amped or full-range
SPECIFICATION;
> 180 Watt 15" speaker and Piezo tweeter
> Output selection and Shape switch for tonal effect adjustment.
> 1/4" phone output and 3 Band Equalizer
> Stereo Link In/Out
> Rugged design, strong carpet-wrapped body, edge protector and metal grille.
INSTRUMENTS
> Rolands ultimate stage piano
> Collection of the worlds finest concert grand pianos
> Authentic Progressive Hammer Action
> Full Parametric 3-band EQ with Graphic Interface
> Standard MIDI File player USB MIDI interface and file transfer
> Stunning Sounds
SPECIFICATION;
> Rolands ultimate stage piano
> Collection of the worlds finest concert grand pianos
> Authentic Progressive Hammer Action
> Full Parametric 3-band EQ with Graphic Interface
> Standard MIDI File player USB MIDI interface and file transfer
> Stunning Sounds
